KA 22-DRS

2RS version Special version adjustable clearance 2RS sealing Inner ring: Antifriction bearing steel, hardened, ground and polished. Outer ring: Brass lined with an antifriction film, consisting PTFE, cold formed around inner ring, outside diameter with thread, screwed into the housing and secured with the rubber bellows. Rubber bellows: Synthetic rubber with vulcanised brass slipring and steel locknut. Housing: Sizes 8 to 12 free-cutting steel, sizes 14 to 30 tempering steel (standardised), all sizes galvanized and chromatised. Bushings: Tempering steel, hardened, bore and outside diameter ground, pressed into the inner ring. They are only used as intake of the brass abrasive rings of the rubber bellows. Due to their low thickness they are not decicated to transmit radial and axial forces into the spherical bearing. Tolerances: Acc. to DIN ISO 12240-4, schedule K, except: d = H10, B =

SKU	KA 22-DRS
A	22 mm
B	35 mm
C1	20 mm
Thread	Male
d	20 mm
d1	26 mm
d2 Max.	55 mm
d3	M22x1.5
dk	38.1 mm
e	44 mm
h	84 mm
Hand Thread	Right
l1	48 mm
l2	111.5 mm
Load Ratings Stat Co	54 kN
Mating Materials	Steel on PTFE
Required Maintenance	Maintenance-Free
Tilt - Angle	10 ?
Weight (0-Storke)	0.56 kg