KIL 20-D

DIN ISO 12240-4 dimension series K Inner ring: Antifriction bearing steel, hardened, ground and polished. Outer ring: Swaged around the inner ring, sliding face made of high-duty bronze. Lubricant is distributed via the lubrication groove in the outer ring. Housing: Sizes 5 to 12 free-cutting steel, sizes 14 to 50 tempering steel (standardised), all sizes galvanized and chromatised. The spherical bearing is pressed into the housing and caulked at both sides. Special versions: Housing heat-treated, for static load capacity C0 see-V Housing made from high-grade tempering steel (heat-treated), for static load capacity C0 see -L Housing crack-tested Sliding face of inner ring 5 um to 10 um hard chromium plated Further versions available on request.

SKU	KIL 20-D
B	25 mm
C1	18 mm
Thread	Female
d	20 mm
d1	24.3 mm
d2 Max.	51 mm
d3	M20x1.5LH
d4	27.5 mm
d5	34 mm
dk	34.9 mm
h1	77 mm
Hand Thread	Left
l3 Min.	30 mm
l4	102.5 mm
Load Ratings Stat C0 -L	78 kN
Load Ratings Stat C0 -V	50 kN
Load Ratings Stat Co	42 kN
Mating Materials	Steel on PTFE
Required Maintenance	Maintenance-Free
Tilt - Angle	15 ?
W	30 mm
Weight (0-Storke)	0.38 kg